Search by part number, manufacturer or technical specification, then narrow the results with filters.
Authenticity, technical version and delivery information
Authenticity and condition
Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.
Matching technical version
The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.
Delivery estimate before ordering
Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.
Network interfaces: Two 10/100BASE-TX interfaces via TB56xx-2ETH; configurable switch/independent. RS-232/485, CAN; EtherCAT requires external CM579.Supply current: 24 V DC; module-alone minimum typical 120 mA; system maximum typical 600 mA including communication/I/O. Not output-current capacity.
Current draw: 200mA @ 5.1V, Voltage or current mode with 250 Ω loads = 220mA @ 24V, Current mode with 500 Ω loads = 275mA @ 24V, Current mode with 750 Ω loads = 340mA @ 24V, Current mode with 1000 Ω loads = 385mA @ 24VInput, current: true
Communication: USB, RS-232 or Ethernet via selected module; wireless options depend on reader and base station.Model selection: DM8700 HD model; corded/wireless configuration and orderable article must be confirmed for quotation.
Power supply: 48–57 V DC primary and redundant terminal inputs; TI-S48048 sold separately; full-load sizing requires confirmationPower consumption: 20 W without PoE load; 380 W with full PoE load
Industrial software platform for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Version: 2026; manufacturer performance description status 08/2025Electrical engineering: Electrical schematics, multi-line and single-line representation; automatic project reportsAutomation design: PLC controller / bus-system configuration; 2D panel layout; standard in this tier
Industrial PLC controller for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Network interfaces: Two 10/100BASE-TX interfaces via TB56xx-2ETH; configurable switch/independent. RS-232/485, CAN; EtherCAT requires external CM579.Supply current: 24 V DC; module-alone minimum typical 120 mA; system maximum typical 600 mA including communication/I/O. Not output-current capacity.Manufacturer article number: 1SAP141000R0378
Analog I/O module Allen-Bradley part number 1756-OF8I; Current draw: 200mA @ 5.1V, Voltage or current mode with 250 Ω loads = 220mA @ 24V, Current mode with 500 Ω loads = 275mA @ 24V, Current mode with 750 Ω loads = 340mA @ 24V, Current mode with 1000 Ω loads = 385mA @ 24V; Input, current: true; Input signal, configurable: true. Technical specifications, condition and supply feasibility are checked before ordering.
Current draw: 200mA @ 5.1V, Voltage or current mode with 250 Ω loads = 220mA @ 24V, Current mode with 500 Ω loads = 275mA @ 24V, Current mode with 750 Ω loads = 340mA @ 24V, Current mode with 1000 Ω loads = 385mA @ 24VInput, current: trueInput signal, configurable: true
Industrial pressure sensor ifm part number PN2694; Number of inputs and outputs: Number of digital outputs: 2; Number of analogue outputs: 1; Operating voltage [V]: 18...30 DC; (to SELV/PELV); Current consumption [mA]: < 35. Technical specifications, condition and supply feasibility are checked before ordering.
Number of inputs and outputs: Number of digital outputs: 2; Number of analogue outputs: 1Operating voltage [V]: 18...30 DC; (to SELV/PELV)Current consumption [mA]: < 35
Industrial protocol gateway for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Industrial handheld barcode reader for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Communication: USB, RS-232 or Ethernet via selected module; wireless options depend on reader and base station.Model selection: DM8700 HD model; corded/wireless configuration and orderable article must be confirmed for quotation.Imager: 1440 × 1080 pixels; 1/3-inch CMOS; 3.45 μm pixels.
Industrial gateway and protocol converter Advantech part number ECU-1051TL-R10ABU; Modulation or Protocol: BACnet, Modbus, MQTT, OPC-UA, SNMP; Frequency: 600MHz; Interface: Ethernet, RS-232, RS-485, USB. Technical specifications, condition and supply feasibility are checked before ordering.
Modulation or Protocol: BACnet, Modbus, MQTT, OPC-UA, SNMPFrequency: 600MHzInterface: Ethernet, RS-232, RS-485, USB
Industrial servo drive, LXM32CU90M2. Manufacturer reference data for model selection; verify application compatibility, installation limits and supply status before ordering.
Reference switching frequency (kHz): 8Communication interface: Integrated: Modbus serial link; pulse train; ±10 V analog controlNominal power at 115 VAC (kW): 0.3
Industrial Layer 2+ managed PoE Ethernet switch for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Power supply: 48–57 V DC primary and redundant terminal inputs; TI-S48048 sold separately; full-load sizing requires confirmationPower consumption: 20 W without PoE load; 380 W with full PoE loadHardware version: v1.6R; exact revision only
Plastic sensor optical fibre Banner Engineering part number PIT46U; Equipment Type: Cable; For Use With/Related Products: Photoelectric Sensor; Fiber Optic Type: Plastic. Technical specifications, condition and supply feasibility are checked before ordering.