Industrial automation technical reference
ARAN VISIONفارسی
ABBPM5650-2ETH

Industrial PLC controller ABB PM5650-2ETH

ABBPM5650-2ETHProduct image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-REF-ABB-PM5650-2ETH
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Manufacturer article number
1SAP141000R0378
Hardware revision
Revision 3, standard AC500; not XC or MC kit. R0278 revision 2 is Limited.
Processor
ARM Cortex-A9; 600 MHz.
Application memory
Program/data 8 MB; web data maximum 72 MB; total downloadable application 84 MB. Resources are not all simultaneously achievable.
Firmware requirement
BootFW/CPUFW V3.6.x or later; no downgrade below V3.6.0. Existing application requires Automation Builder 2.6.0 or later upgrade.
Network interfaces
Two 10/100BASE-TX interfaces via TB56xx-2ETH; configurable switch/independent. RS-232/485, CAN; EtherCAT requires external CM579.
Supply current
24 V DC; module-alone minimum typical 120 mA; system maximum typical 600 mA including communication/I/O. Not output-current capacity.
Motion example
Typical EtherCAT 8 axes / 1 ms, plus one virtual axis; external module/application dependent.
Environment
Standard: horizontal 0–60 °C; vertical 0–40 °C with output load reduced to 50% per group.
Assembly scope
Terminal base required; communication slots depend on base/CPU. Central I/O ratings are expansion capacity, not integrated channels.
Report a product-data issue

Documents / datasheets

Manufacturer datasheet · PM56xx family / standard PM5650-2ETH / hardware revision 3 R0378 · en · PDF · 3ADR010079, 15, en_US · 2026-08-19Manufacturer source: ABB · Document author: ABB · Model explicitly covered in family document · Covered models: PM5630-2ETH, PM5650-2ETH · Checked: 2026-10-14View / print the ARAN VISION specification sheetOfficial manufacturer source · ABB

Source reviewed: 2026-10-14

Description

Industrial PLC controller for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.

ABB
PM5630-2ETH

Industrial PLC controller ABB PM5630-2ETH

Network interfaces: Two 10/100BASE-TX interfaces via TB56xx-2ETH; configurable switch/independent. RS-232/485, CAN; EtherCAT requires external CM579.Supply current: 24 V DC; module-alone minimum typical 110 mA; system maximum typical 400 mA including communication/I/O. Not output-current capacity.

Technical specificationsManufacturer datasheet · PM56xx family / standard PM5630-2ETH / hardware revision 3 R0378 · en · PDF · 3ADR010079, 15, en_US · 2026-08-19Manufacturer source: ABB · Document author: ABB · Model explicitly covered in family document · Covered models: PM5630-2ETH, PM5650-2ETH · Checked: 2026-10-14