Industrial automation technical reference
ARAN VISIONفارسی
ifmSI5006

Flow sensor ifm model SI5006

Flow sensor ifm model SI5006, Part number SI5006

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-FQZI47
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Number of inputs and outputs
Number of digital outputs: 1
Process connection
threaded connection M18 x 1,5 internal thread
Media
Liquids; Gases
Medium temperature [°C]
-25...80
Pressure rating
300 bar: 30 MPa
MAWP for applications according to CRN [bar]
208
Frequency AC [Hz]
47...63
Operating voltage tolerance [%]
-15...10
Operating voltage [V]
90...240 AC
Max. power consumption [VA]
3.5
Protection class
II
Reverse polarity protection
No
Power-on delay time [s]
10
Total number of outputs
1
Output signal
switching signal
Electrical design
relay
Number of digital outputs
1
Output function
normally open / normally closed; (parameterisable)
Contact rating
3 A (250 V AC / 30 V DC); (number of switching cycles: 20 million mechanically; switching cycles at 3 A load: 100,000 electrical; type of switch-off: normally open)
Short-circuit proof
No
Overload protection
No
Probe length L [mm]
45
Setting range [cm/s]
200...3000
Greatest sensitivity [cm/s]
200...800
Repeatability [% of Sr]
1...5
Note on repeatability
for water 5...100 cm/s; 25 °C; Factory setting
Temperature drift [cm/s x 1/K]
0.1; (for water 5...100 cm/s; 10...70 °C)
Temperature gradient [K/min]
300
Switch point accuracy [cm/s]
± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting)
Hysteresis [cm/s]
2...5; (for water 5...100 cm/s; 25 °C; Factory setting)
Response time [s]
1...10
Adjustment of the switch point
pushbutton
Ambient temperature [°C]
-25...80
Storage temperature [°C]
-25...100
Protection rating
IP 67
EMC
DIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistance
DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6: 18 g (55...2000 Hz)
MTTF [years]
221
Weight [g]
262.5
Housing
cylindrical
Dimensions [mm]
Ø 50 / L = 113
Materials
stainless steel (316L/1.4404); stainless steel (304/1.4301); PC; PBT-GF20; EPDM/X
Materials (wetted parts)
stainless steel (316L/1.4404); O-ring: FKM 80 Shore A
Probe diameter [mm]
8.2
Installation length EL [mm]
45
Display
function: 10 x LED, three-colour
Required protection
miniature fuse to IEC60127-2 sheet 1; ≤ 5 A; fast acting
Remarks
Recommendation Check the safe functioning of the unit after a short circuit.
Pack quantity
1 pcs.
Connector
1 x 1/2"; coding: C; Contacts: 5
Min. insulation resistance [MΩ]
100; (500 V DC)
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · ifm

Source reviewed: 2026-10-24

Description

Flow sensor ifm part number SI5006; Number of inputs and outputs: Number of digital outputs: 1; Frequency AC [Hz]: 47...63; Operating voltage tolerance [%]: -15...10. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.