Industrial automation technical reference
ARAN VISIONفارسی
ifmSA6010

Flow sensor ifm model SA6010

Flow sensor ifm model SA6010, Part number SA6010

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-1HYI11V
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Number of inputs and outputs
Number of digital outputs: 2; Number of analogue outputs: 1
Process connection
threaded connection 1/2" NPT external thread
Special feature
Gold-plated contacts
Media
water; glycol solutions; air; oils
Note on media
low-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F); high-viscosity oils with viscosity: > 40 mm²/s (104 °F)
Medium temperature [°F]
-4...194
Pressure rating
100 bar: 1450 psi: 10 MPa
MAWP for applications according to CRN [bar]
100
Operating voltage [V]
18...30 DC
Current consumption [mA]
< 100
Protection class
III
Reverse polarity protection
Yes
Power-on delay time [s]
10
Measuring principle
calorimetric
Total number of outputs
2
Output signal
switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design
PNP/NPN
Number of digital outputs
2
Output function
normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]
2.5
Permanent current rating of switching output DC [mA]
250
Number of analogue outputs
1
Analogue current output [mA]
4...20; (scalable)
Max. load [Ω]
350
Short-circuit protection
Yes
Type of short-circuit protection
pulsed
Overload protection
Yes
Frequency of the output [Hz]
0...1000
Probe length L [mm]
26.6
Operating mode
relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended; Factory setting: relative)
Measuring range [°F]
-4...194
Resolution [°F]
0.5
Setting range [ft/s]
6...656
Greatest sensitivity [ft/s]
6...328
Temperature drift [cm/s x 1/K]
0,01 fps x 1/K (< 68 °F; > 158 °F)
Temperature gradient [K/min]
100
Repeatability
0,05 m/s; (water; flow velocity: 0,05...3 m/s)
Accuracy
± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 68...158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Temperature drift
± 0,003 K/°F
Accuracy [K]
± 0,3 / ± 1; (water; flow velocity: 1...9,85 fps / air; flow velocity: > 32,8 fps)
Response time [s]
0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Dynamic response T05 / T09 [s]
1,5 (T09); (water; flow velocity: 1...9,85 fps)
Parameter setting options
hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
Profiles
Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis
SIO mode
Yes
Required master port type
A
Process data analogue
2
Process data binary
2
Min. process cycle time [ms]
3
Supported DeviceIDs
Type of operation: DeviceID; Factory setting / ModE = (REL): 537; ModE = (GAS): 551; ModE = (LIQU): 544
Ambient temperature [°F]
-40...176
Storage temperature [°F]
-40...212
Protection rating
IP 65; IP 67
EMC
DIN EN 60947-5-9
Shock resistance
DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]
143
UL approval
UL approval no.: I003; File number UL: E174189
Weight [g]
251.5
Housing
cylindrical
Dimensions [mm]
Ø 34 / L = 133.4
Materials
stainless steel (316L/1.4404); stainless steel (301/1.4310); PBT-GF20; PBT-GF30
Materials (wetted parts)
stainless steel (316L/1.4404)
Probe diameter [mm]
5
Installation length EL [mm]
26.6
Display
Display unit: 6 x LED, green (%, fps, gpm, cfm, °F, 10³); switching status: 2 x LED, yellow; measured values: alphanumeric display, red/green 4-digit
Remarks
MW = measured value; MEW = Final value of the measuring range
Pack quantity
1 pcs.
Connector
1 x M12; coding: A; Contacts: 4, gold-plated
Min. insulation resistance [MΩ]
100; (500 V DC)
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · ifm

Source reviewed: 2026-10-24

Description

Flow sensor ifm part number SA6010; Number of inputs and outputs: Number of digital outputs: 2; Number of analogue outputs: 1; Operating voltage [V]: 18...30 DC; Current consumption [mA]: < 100. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.