Authenticity and condition
Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.
Industrial automation technical reference
Products
Find industrial automation components
Search by part number, manufacturer or technical specification, then narrow the results with filters.
Authenticity, technical version and delivery information
Matching technical version
The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.
Delivery estimate before ordering
Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.
IPAQ C202Temperature transmitter INOR IPAQ C202
Measuring channels: 1Voltage - Supply: 6…32 V DC (C202); C202X differs
Technical specificationsManufacturer datasheet · IPAQ C202 · en · HTMLManufacturer source: INOR · Exact model verified · Covered models: IPAQ C202 · Checked: 2026-10-08
MDX61B0110-5A3-4-00SEW MOVIDRIVE drive MDX61B0110-5A3-4-00
Nominal supply voltage: 3 x AC 380-500 VNominal output current: 24 A at 400 V; 20% current reduction at 500 V; performance data at PWM 4 kHz
Technical specificationsManufacturer manual · System manual technical table page 44 and exact model example page 509 · en · PDF · 27793230/EN / 08/2022Manufacturer source: SEW-EURODRIVE · Document author: SEW-EURODRIVE GmbH & Co KG · Model explicitly covered in family document · Covered models: MDX61B0110-5A3-4-00 · Checked: 2026-10-16
8129114Four-port IO-Link master CPX-AP-A
Nominal operating voltage: 24 V DC ±25%; electronics/sensors and load; SELV/PELV required; account for voltage dropmodel: CPX-AP-A-4IOL-M12
Technical specificationsDatasheetManufacturer datasheet · CPX-AP-A-4IOL-M12 / 8129114 / EN-US · en · PDFManufacturer source: Festo · Document author: Festo SE & Co. KG · Exact model verified · Covered models: 8129114 · Checked: 2026-10-16
TI-PG80 (v2.xR)Industrial PoE Ethernet switch TRENDnet TI-PG80 (v2.xR)
Power supply: 48–56 V DC; dual redundant inputs; TI-S24052 sold separatelyPower consumption: 5.76 W at 48 V DC; without powered devices
Technical specificationsManufacturer datasheet · TI-PG80 v2.xR / Updated 11/7/2024 · en · PDF · v2.xR · 2024-11-07Manufacturer source: TRENDnet · Document author: TRENDnet · Exact model verified · Covered models: TI-PG80 (v2.xR) · Checked: 2026-10-09
Elexant 5010i-LIMIndustrial temperature monitoring controller Raychem Elexant 5010i-LIM
Voltage - Supply: 100–250 V AC ±10%, 50/60 Hz; own consumption maximum 20 VA.Voltage monitoring: 90–305 V AC measurement range; not the supply-voltage rating.
Technical specificationsManufacturer datasheet · Elexant 5010i and 5010i-LIM / exact ordering articles / current Chemelex sheet · en · PDF · RAYCHEM-DS-EU1961-Elexant5010i-EN-2504Manufacturer source: Chemelex / Raychem · Document author: Chemelex · Model explicitly covered in family document · Covered models: Elexant 5010i, Elexant 5010i-LIM · Checked: 2026-10-14
EK1100Coupler EtherCAT Beckhoff model EK1100
Interface Network: 2 × RJ45, EtherCAT at 100 Mbit/sPower supply: 24V DC
Technical specificationsManufacturer manual · EK110x-00xx / EK15xx / EK1100 section 2.2.1 pages 20-21 / EN / 4.8.0 · en · PDF · 4.8.0 · 2025-12-01Manufacturer source: Beckhoff · Model explicitly covered in family document · Covered models: EK1100 · Checked: 2026-10-08Manufacturer datasheet · EK1100 / official HTML technical specifications; reviewed technical table, PDF manual retained · en · HTMLManufacturer source: Beckhoff · Document author: Beckhoff Automation GmbH & Co. KG · Exact model verified · Covered models: EK1100 · Checked: 2026-10-16
IS3805CMachine vision camera Cognex IS3805C
Frame rate: 21 fps maximum at full resolutionSensor: 2/3" CMOS
Technical specificationsManufacturer manual · In-Sight 3800 Reference Manual · en · PDF · 2025-05-08Manufacturer source: Cognex · Model explicitly covered in family document · Covered models: IS3801M, IS3801C, IS3805C · Checked: 2026-10-08
AZD-AEDClosed-loop motion driver Oriental Motor AZD-AED
Main input current: 2.7–6.4 A; motor-dependent. Supply current, not motor output rating.Digital interface: 6 control inputs; 6 control outputs; 2 pulse inputs and 2 pulse outputs.
Technical specificationsManufacturer manual · AZ EtherCAT family / exact AC and KED2 model tables pages 240–241 · en · PDF · HM-60536-2 · 2026-03Manufacturer source: Oriental Motor · Document author: Oriental Motor Co., Ltd. · Model explicitly covered in family document · Covered models: AZD-AED, AZD-CED, AZD-KED2 · Checked: 2026-10-14
TM5SPS2FFused power distribution module for I/O and bus Schneider Electric TM5SPS2F
Technical characteristics: 24 V DC I/O segment; 6.3 AProduct family: Modicon TM5
Technical specificationsManufacturer datasheet · TM5SPS2F / EN · enManufacturer source: Schneider Electric · Exact model verified · Covered models: TM5SPS2F · Checked: 2026-10-24
IE5090Proximity sensor ifm model IE5090
Operating voltage [V]: 10...30 DCCurrent consumption [mA]: < 10
1062423Industrial network adapter and scanner Phoenix Contact model 1062423
Interface: RS-232/422/485Type: Ethernet to Serial
Eplan Electric P8 ProIndustrial software platform EPLAN Eplan Electric P8 Pro
Version: 2026; manufacturer performance description status 08/2025Electrical engineering: Electrical schematics, multi-line and single-line representation; automatic project reports
Technical specificationsManufacturer datasheet · Eplan Electric P8 Pro 2026 / Performance Description / status 08/2025 · en · PDF · 2026 · 2025-08Manufacturer source: EPLAN · Document author: EPLAN GmbH & Co. KG · Model explicitly covered in family document · Covered models: Eplan Electric P8 Pro · Checked: 2026-10-16
Multi-item quote basketAdd products to the basket or send an unlisted part number directly.