Industrial automation technical reference
ARAN VISIONفارسی
Festo8129114

Four-port IO-Link master CPX-AP-A

Festo8129114Product image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FES-8129114
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

model
CPX-AP-A-4IOL-M12
IO-Link ports
4 ports
Module connector
M12
Maximum IO-Link cable length
20 m
Ambient temperature [°C]
20- to 50+ °C
Dimensions
50.1 × 107.3 × 57.5 mm
Weight
Approx. 90 g
System communication cycle
System cycle is not established by this reviewed sheet; internal cycle <1 ms; IO-Link cycle depends on the connected device
AP system communication rate
AP protocol; numeric system rate is not specified in the reviewed 8129114 sheet
Internal cycle time
<1 ms
IO-Link port class
Class B; 4 ports; Master V1.1; DI / COM1 / COM2 / COM3
Nominal operating voltage
24 V DC ±25%; electronics/sensors and load; SELV/PELV required; account for voltage drop
Ambient temperature condition
Apply IEC 61131-2:2017 temperature derating; above 2000 m apply altitude-related temperature derating; maximum 3500 m
IO-Link minimum cycle time
Depends on minimum supported cycle of the connected IO-Link device
Report a product-data issue

Documents / datasheets

Manufacturer datasheet · CPX-AP-A-4IOL-M12 / 8129114 / EN-US · en · PDFManufacturer source: Festo · Document author: Festo SE & Co. KG · Exact model verified · Covered models: 8129114 · Checked: 2026-10-16View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Festo

Source reviewed: 2026-09-05

Description

Four-port IO-Link module for CPX-AP-A remote I/O, with decentralised installation and smart sensor/actuator connections.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.