HMS NetworksABC3090-A

Industrial protocol gateway HMS Networks ABC3090-A

HMS NetworksABC3090-AProduct image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-REF-HMS Networks-ABC3090-A
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Manufacturer model code
40-SER-ETH-B; exact product ID ABC3090-A.
Serial interface
RS-232 / RS-485; Modbus RTU client/master and configurable serial transactions.
Industrial Ethernet selection
EtherCAT, EtherNet/IP, Modbus TCP or PROFINET selected via corresponding firmware; not four simultaneous controller networks.
Process data per direction
EtherCAT 1486 bytes; EtherNet/IP 1448 bytes; Modbus TCP 1500 bytes; PROFINET 1024 bytes. Protocol-dependent; not a universal 1500-byte capacity.
Supply voltage
12–30 V DC; typical 90 mA at 24 V DC, maximum 125 mA at 24 V DC.
Operating environment
−25 to +70 °C; IP20; DIN rail EN 50022.
Dimensions
27 × 144 × 98 mm (width × height × depth); net weight 150 g.
Configuration
Web interface over dedicated Ethernet configuration port; network protocol requires applicable firmware.
Node count review scope
Datasheet page 1: up to 32 Modbus RTU servers. Page 5: max stations/nodes 31. Unresolved; confirm firmware/manual before network sizing.
Connector review scope
Page 3 repeats 2xRJ45 groups in a combined field. Do not sum these into a confirmed physical port count; check exact installation manual.
Replacement scope
Listed predecessor models require separate wiring, firmware and configuration compatibility review; not automatic drop-in approval.
Report a product-data issue

Documents / datasheets

Source reviewed: 2026-10-14

Description

Industrial protocol gateway for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.

RTA
460BSSC-N2E

Industrial protocol gateway RTA 460BSSC-N2E

Protocol roles: BACnet/IP server to Siemens S7 client; not BACnet MS/TP.PLC support: S7-300/400/1200/1500; up to five PLC connections; confirm firmware and PLC access configuration.

Technical specificationsManufacturer datasheet · 460BSSC-N2E / exact two-page platform datasheet · en · PDFManufacturer source: Real Time Automation · Document author: Real Time Automation, Inc. · Exact model verified · Covered models: 460BSSC-N2E · Checked: 2026-10-14