Industrial automation technical reference
ARAN VISIONفارسی
Siemens6ES79240CC200AA0

Industrial communication module Siemens model 6ES79240CC200AA0

Industrial communication module Siemens model 6ES79240CC200AA0, Part number 6ES79240CC200AA0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-UC7D1M
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
Fully modular connection
width of screwdriver blade
3.5 mm
width × height × depth
57 mm × 76 mm × 60 mm
Mounting position
any
height / with lowest-profile installation
60 mm
Net weight
0.17 kg
Technical Product Detail Page
https://i.siemens.com/1P6ES7924-0CC20-0AA0
target system
SIMATIC S7-1500
suitability for use
Analog I/O modules
product brand name
SIMATIC Top connect
product designation
Connection module
at DC / rated value
24 V
rated value
50 V
at DC / maximum
50 V
ampacity / per pin / maximum
1 A
continuous current / at DC / per signal cable / maximum
1 A
product function / infeed function
Yes
PE connection
No
shield connection
No
disconnector
No
product feature / cross-connectable
No
number of terminals
30; Intended for analog
type of connecting terminal
Screw-type terminal
position / of the terminal
Top
number of terminal levels
1
design of terminal / terminal levels internally linked
No
type of electrical connection / for connecting cable
Plug-in connection
number of poles / at the 1st interface
16; IDC connector with installed strain relief for the connecting cable
number of the plug contacts / of the electrical connection
1
wire length / maximum
30 m; between front connector module and Connection module
type of connectable conductor cross-sections / solid
No
for flexible conductor / with core end processing
0.5 ... 2.5 mm²; End sleeve according to DIN 46228/1
stranded
0.5 ... 2.5 mm²
finely stranded / with core end processing
0.5 ... 2.5 mm²
number of cables / per connection
2; Connection for internal system: Combination of 1 or 2 Wires until the sum total of cross sections be achieved in a ferrule.
tightening torque
0.4 ... 0.5 N·m
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

Industrial communication module Siemens part number 6ES79240CC200AA0; continuous current / at DC / per signal cable / maximum: 1 A; number of poles / at the 1st interface: 16; IDC connector with installed strain relief for the connecting cable; product type designation: Fully modular connection. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.