Industrial automation technical reference
ARAN VISIONفارسی
Siemens6AV21818XP000AX0

Industrial memory card Siemens model 6AV21818XP000AX0

Industrial memory card Siemens model 6AV21818XP000AX0, Part number 6AV21818XP000AX0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-1TGH4S2
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
SD memory card
Mounting position
Any, dependent on target device
Type of supply voltage
DC
Rated value (DC)
3.3 V; Max 3.6 V
Memory Size
2 Gbyte
Transmission rate for reading, max.
600 Mbit/s; Typical
Transmission rate for writing, max.
600 Mbit/s; Typical
Width
24 mm
Height
32 mm
Standard
Yes; Typically 10 000 insertion cycles
Flat
Yes
Mounting in portrait format possible
Yes
Mounting in landscape format possible
Yes
Current consumption (rated value)
100 mA; Typical, maximum value
Type of memory
Secure Digital memory card
Wear leveling (distributed writing)
Yes
Write protection switch
Yes; Effectiveness depends on the device
Number of pins device-side
9
CE mark
Yes
UKCA mark
Yes
UL approval
Yes
cULus
Yes
KC approval
Yes
EAC (formerly Gost-R)
Yes
RoHS conformity
Yes
China RoHS compliance
Yes
Marine approval
Yes; Passive component, therefore dependent on target device
ATEX Zone 2
Yes; Always comply with the operating instructions of the target device.
ATEX Zone 22
Yes; Always comply with the operating instructions of the target device.
IECEx Zone 2
Yes; Always comply with the operating instructions of the target device.
IECEx Zone 22
Yes; Always comply with the operating instructions of the target device.
cULus Class I Zone 2, Division 2
Yes; Always comply with the operating instructions of the target device.
FM Class I Division 2
Yes; Always comply with the operating instructions of the target device.
Germanischer Lloyd (GL)
Yes; Always comply with the operating instructions of the target device.
American Bureau of Shipping (ABS)
Yes; Always comply with the operating instructions of the target device.
Bureau Veritas (BV)
Yes; Always comply with the operating instructions of the target device.
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

Industrial memory card Siemens part number 6AV21818XP000AX0; Type of supply voltage: DC; Rated value (DC): 3.3 V; Max 3.6 V; Current consumption (rated value): 100 mA; Typical, maximum value. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.