Industrial automation technical reference
ARAN VISIONفارسی
Siemens6ES71544AB100AB0

Industrial communication module Siemens model 6ES71544AB100AB0

Industrial communication module Siemens model 6ES71544AB100AB0, Part number 6ES71544AB100AB0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-96W596
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
IM 154-4 PN HF
Rated value (DC)
24 V
from supply voltage 1L+, max.
400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage
Interfaces/bus type
PROFINET IO
Transmission rate, max.
100 Mbit/s
PROFINET IO
Yes
PROFIBUS
No
EtherNet/IP
No
between supply voltage and electronics
Yes
Width
135 mm
Height
130 mm
Depth
60 mm
Vendor identification (VendorID)
0x002A
Device identifier (DeviceID)
0x0305
IRT
Yes
Reverse polarity protection
Yes; against destruction
Short-circuit protection
Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not
power supply according to NEC Class 2 required
No
Power loss, typ.
6 W; dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher
Number of Inputs and Type
256 byte
Outputs
256 byte
Autonegotiation
Yes
PROFIsafe
Yes
SNMP
Yes
ping
Yes
ARP
Yes
MRP
Yes
Diagnostic alarm
Yes; Parameterizable
Hardware interrupt
Yes; Parameterizable
MAINT LED
Yes
LINK LED
Yes
RX/TX LED
Yes
For load voltage monitoring
Yes
Bus fault BF (red)
Yes
Group error SF (red)
Yes
Monitoring 24 V voltage supply ON (green)
Yes
Supports protocol for PROFINET IO
Yes
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

Industrial communication module Siemens part number 6ES71544AB100AB0; Rated value (DC): 24 V; from supply voltage 1L+, max.: 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage; Interfaces/bus type: PROFINET IO. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.