Industrial automation technical reference
ARAN VISIONفارسی
Siemens6AV66718XA000AX0

Industrial connector Siemens model 6AV66718XA000AX0

Industrial connector Siemens model 6AV66718XA000AX0, Part number 6AV66718XA000AX0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-103RZE7
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
Connector, female, 2-pin, type 1
Rated value (DC)
24 V
Width
10 mm
Height
15 mm
Standard
Yes; Z shape
Wall mounting/direct mounting
Yes; can be plugged into SIMATIC HMI device
Number of pins HMI-side
2; Male
Number of pins device-side
2; Female, screw terminals
RoHS conformity
Yes
China RoHS compliance
Yes
ATEX Zone 2
Yes; Device-dependent, see operating instructions
ATEX Zone 22
Yes; Device-dependent, see operating instructions
IECEx Zone 2
Yes; Device-dependent, see operating instructions
IECEx Zone 22
Yes; Device-dependent, see operating instructions
cULus Class I Zone 1
Yes; Device-dependent, see operating instructions
cULus Class I Zone 2, Division 2
Yes; Device-dependent, see operating instructions
FM Class I Division 2
Yes; Device-dependent, see operating instructions
min.
0 °C
max.
55 °C
Operation, max.
95 %
plastic
Yes; green
4.5 V
Yes; Screw terminals
Thickness
27 mm
Delivery quantity in pieces
10
Merchandise
Yes
Manufacturer name
PHOENIX CONTACT
Manufacturer's address
Flachsmarktstraße 8, 32825 Blomberg, Germany
Target devices
for Comfort Panel, IPC, Flat Panel, Thin Client
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

Industrial connector Siemens part number 6AV66718XA000AX0; Rated value (DC): 24 V; Product type designation: Connector, female, 2-pin, type 1; Standard: Yes; Z shape. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.