ifm AL2607

Product specifications

Operating voltage [V]

18...30 DC

Current consumption [mA]

50; (US)

Protection class

III

Additional voltage supply [V]

18...30 DC; (UA)

Max. current consumption from additional supply [mA]

16000; (UA)

Total number of inputs and outputs

16

Number of inputs and outputs

Number of digital inputs: 16; Number of analogue inputs: 8; Number of frequency inputs: 2; Number of digital outputs: 16; Number of PWM outputs: 8

Number of frequency inputs

2

Number of digital inputs

16; (parameterisable)

Input circuit of digital inputs

PNP; (type 3 (IEC 61131-2))

Sensor supply of the inputs

AUX (UA)

Voltage supply [V]

18...30

Input current High [mA]

2...15

Input current Low [mA]

0...1.5

Switching level high [V]

11...28

Switching level low [V]

0...5

Number of analogue inputs

8; (parameterisable current/voltage input)

Analogue input (current) [mA]

4...20

Analogue input (voltage) [V]

0...10

Resolution

16 Bit

Accuracy [%]

0,3

Number of digital outputs

16; (parameterisable)

Max. current load per output [mA]

2000

Max. current load outputs total [A]

16

Short-circuit protection

yes

Actuator supply outputs

AUX (UA)

Number of PWM outputs

8; (acyclic enhanced modus)

Number of PWM-I outputs

2; (acyclic enhanced modus)

PMW/PWM-I output

max. current PWM-I output [mA]: 2000; available factors for the controller [PID]: Kp, Ki, Kd; currently requested resolution [mA]: 1; accuracy PWM-I Ausgang [%]: 2,2; range of the PWM output pulse/pause ratio [‰]: 0...1000; switch-on time resolution ‰]: 1; PWM/PWM-I frequency range [Hz]: 20...1000; number of configurable frequencies: 2; number of PWM outputs with optional dither: 8; dither level [‰]: 1...250; dither number: 1...20

Sampling rate [Hz]

0...3000

Communication interface

IO-Link

Transmission type

COM3 (230,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

SIO mode

no

Required master port type

A

Min. process cycle time [ms]

4

Supported DeviceIDs

Type of operation: DeviceID; Acyclic enhanced parametrisation: 1449; Acyclic parametrisation: 1316; Factory setting: Cyclic parametrisation: 1315

Note

Parameter setting can be changed from “cyclic” to “acyclic” and “acyclic enhanced”; For further information please see the IODD PDF file under "Downloads"

Profiles

Common - I&D: Identification and Diagnosis; Function: Multiple switching signal

Profiles

Common - I&D: Identification and Diagnosis

Ambient temperature [°C]

-25...60

Storage temperature [°C]

-25...70

Max. relative air humidity [%]

90

Max. height above sea level [m]

2000

Protection

IP 65; IP 67

Protection rating (NEMA 250)

6P

Pollution degree

2

Chemical media

ISO 16750-5: AA, BA, BD, HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1: AA

EMC

EN 61000-6-2; EN 61000-6-4; IEC 61131-9

Shock resistance

DIN EN 60068-2-27

Vibration resistance

DIN EN 60068-2-64; DIN EN 60068-2-6

MTTF [years]

59

Complies with the requirements

ISO 13849-1 PL d

Weight [g]

398.1

Dimensions [mm]

26 x 59.3 x 208

Materials

housing: PA orange; socket: brass nickel-plated

Sealing material

FKM

Tightening torque [Nm]

< 0.8

Display

operation: 4 x LED, green; fault: 3 x LED, red; function: 16 x LED, yellow

Accessories (optional)

protective cap for M12 sockets

Remarks

Using the device within a system with requirements for functional safety is possible by deactivating the actuator voltage UA without interaction.; For further information on functional safety, please refer to the operating instructions supplement under “Downloads”.

Pack quantity

1 pcs.

Connector

1 x M12; coding: L; Contacts: 5

Connector

1 x M12; coding: A; Contacts: 4

Connector

8 x M12; coding: A; Contacts: 4; Sealing: FKM

Documents and media