Specialist electrical and industrial automation store
فارسی
Store/PLC and HMI/AL2205

Analog input module ifm model AL2205

Analog input module ifm model AL2205, Part number AL2205

Check the part number and technical specifications before selection; an image alone is not sufficient for matching.

Manufacturer part number
AL2205
Manufacturer
ifm
ARAN VISION part number
AV-FEED-152Q3KQ
Category
PLC and HMI
Product description
Analog input module ifm part number AL2205; Operating voltage [V]: 18...30 DC; Current consumption [mA]: 100; (US); Protection class: III. Technical specifications, condition and supply feasibility are checked before ordering.
Manufacturer standard lead time
Manufacturer confirmation required

Manufacturer replenishment time; delivery to you is confirmed separately.

Product attributes

Operating voltage [V]
18...30 DC
Current consumption [mA]
100; (US)
Protection class
III
Additional voltage supply [V]
18...30 DC; (UA UAi)
Max. current consumption from additional supply [mA]
4000; (UA; UAi: 400 mA)
Total number of inputs and outputs
16; (configurable)
Number of inputs and outputs
Number of digital inputs: 16; Number of analogue inputs: 8; Number of digital outputs: 16
Number of digital inputs
16; (configurable)
Input circuit of digital inputs
PNP; (type 3 (IEC 61131-2))
Sensor supply of the inputs
AUX (UA, UAi)
Voltage supply [V]
18...30
Input current High [mA]
2...15
Input current Low [mA]
0...1.5
Switching level high [V]
11...28
Switching level low [V]
0...5
Number of analogue inputs
8; (configurable current/voltage input)
Analogue input (current) [mA]
4...20
Analogue input (voltage) [V]
0...10
Resolution
16 Bit
Number of digital outputs
16; (configurable)
Max. current load per output [mA]
1800
Max. current load outputs total [A]
3.6; (max. current load per segment: 1800 mA)
Short-circuit protection
Yes
Actuator supply outputs
AUX (UA)
Communication interface
IO-Link
Transmission type
COM3 (230,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
SIO mode
No
Required master port type
A
Min. process cycle time [ms]
4
Supported DeviceIDs
Type of operation: DeviceID; Acyclic enhanced parametrisation: 1448; Acyclic parametrisation: 1316; Factory setting: Cyclic parametrisation: 1315
Note
Parameter setting can be changed from “cyclic” to “acyclic” and “acyclic enhanced”; For further information please see the IODD PDF file under "Downloads"
Profiles
Common - I&D: Identification and Diagnosis; Function: Multiple switching signal
Profiles
Common - I&D: Identification and Diagnosis
Ambient temperature [°C]
-25...60
Storage temperature [°C]
-25...70
Max. relative air humidity [%]
90
Max. height above sea level [m]
2000
Protection
IP 65; IP 67; IP 69K; (operation with stainless steel protective caps: IP 69K)
Protection rating (NEMA 250)
6P
Pollution degree
2
Chemical media
ISO 16750-5: HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1: AA
EMC
EN 61000-6-2; EN 61000-6-3; IEC 61131-9
Shock resistance
DIN EN 60068-2-27
Vibration resistance
DIN EN 60068-2-64; DIN EN 60068-2-6
MTTF [years]
46
Weight [g]
407
Housing
rectangular
Type of mounting
backplane mounting
Dimensions [mm]
208 x 59.3 x 38.4
Materials
housing: PA grey; socket: stainless steel (316L/1.4404)
Sealing material
EPDM
Tightening torque [Nm]
< 0.8
Display
operation: 1 x LED, green; fault: 1 x LED, red; function: 1 x LED, yellow
Accessories (optional)
protective cap for M12 sockets
Pack quantity
1 pcs.
Connector
1 x M12; coding: A; Contacts: 4
Connector
8 x M12; coding: A; Contacts: 4; Sealing: EPDM
Report a product information error
Documents and technical resources
ARAN VISION product sheetView and print specifications
Official product pageifm

Source checked: 2026-09-10

Product questions

Send the part number and your question to support to check compatibility, lead time or specifications.

Additional information and order matching

The revision, condition, delivery time and required documentation must be confirmed before the order is finalised. Export classifications and approvals are provided only where valid evidence is available.

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Technical code verification

Model, revision and equipment compatibility are checked before final confirmation.

Clear product condition

New, surplus or refurbished condition and warranty terms are stated in the quotation.

Products outside the catalog

If this model is unavailable, send the part number or nameplate photo for custom sourcing.

Related products