ماژول ورودی/خروجی صنعتی Siemens مدل 6EP19612BA11

مشخصات فنی

نوع و مدل محصول

PSE200U

supply voltage at DC rated value

24 V

type of outputs connection

simultaneous switch-on of all outputs after power-up of the supply voltage > 20 V, delay time of 25 ms, 100 ms, or "load-optimized" via DIP switch configurable for sequential switch-on

protection class IP

IP20

width × height × depth of the enclosure

72 × 80 × 72 mm

installation width × mounting height

72 mm × 180 mm

DIN-rail mounting

دارد

S7 rail mounting

ندارد

وزن خالص

0.2 kg

Technical Product Detail Page

https://i.siemens.com/1P6EP1961-2BA11

نام تجاری محصول

SITOP

عنوان محصول

SITOP Selectivity module

type of current supply

Selectivity module, 4 x 3 A Common signal contact

type of the power supply network

Controlled DC voltage

input voltage at DC

22 ... 30 V

overvoltage overload capability

35 V

input current at rated input voltage 24 V rated value

12 A

voltage curve at output

controlled DC voltage

formula for output voltage

Vin - approx. 0.2 V

relative overall tolerance of the voltage note

In accordance with the supplying input voltage

number of outputs

4

output current up to 60 °C per output rated value

3 A

adjustable current response value current of the current-dependent overload release

0.5 ... 3 A

type of response value setting

via potentiometer

response delay maximum

5 s

product feature parallel switching of outputs

ندارد

efficiency in percent

97 %

power loss [W] at rated output voltage for rated value of the output current typical

9 W

of the excess current

Iout = 1.0 ...1.5 x set value, switch-off after approx. 5 s

of the current limitation

Iout = 1.5 x set value, switch-off after typ. 100 ms

of the immediate switch-off

Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms

residual current at switch-off typical

1 mA

design of the reset device/resetting mechanism

via sensor per output

remote reset function

non-isolated 24 V input (signal level "high" at > 15 V)

fuse protection type at input

5 A per output (not accessible)

display version for normal operation

Three-color LED per output: green LED for "Output switched through"; yellow LED for "Output switched off manually"; red LED for "Output switched off due to overcurrent"

اسناد و دیتاشیت

بازبینی منبع: 2026-10-24

شرح محصول

ماژول ورودی/خروجی صنعتی Siemens با پارت‌نامبر 6EP19612BA11؛ supply voltage at DC rated value: 24 V؛ type of current supply: Selectivity module, 4 x 3 A Common signal contact؛ type of the power supply network: Controlled DC voltage. مشخصات فنی، وضعیت و امکان تأمین پیش از ثبت سفارش کنترل می‌شود.