ماژول ورودی/خروجی صنعتی Siemens مدل 6EP19612BA00

مشخصات فنی

نوع و مدل محصول

select

supply voltage at DC rated value

24 V

type of outputs connection

Simultaneous connection of all outputs after power up of the supply voltage, delay time of 24 ms or 100 ms programmable for sequential connection

protection class IP

IP20

width × height × depth of the enclosure

72 × 90 × 90 mm

installation width × mounting height

72 mm × 190 mm

DIN-rail mounting

دارد

S7 rail mounting

ندارد

وزن خالص

0.4 kg

Technical Product Detail Page

https://i.siemens.com/1P6EP1961-2BA00

نام تجاری محصول

SITOP

عنوان محصول

SITOP Selectivity module

type of current supply

Diagnosis module, 4 x 10 A

type of the power supply network

Controlled DC voltage (SITOP select is not designed for operation with DC UPS module 40 A (6EP1 931-2FC21/-2FC42)

input voltage at DC

22 ... 30 V

overvoltage overload capability

35 V; 100 ms

input current at rated input voltage 24 V rated value

40 A

voltage curve at output

controlled DC voltage

formula for output voltage

Vin - approx. 0.3 V

relative overall tolerance of the voltage note

In accordance with the supplying input voltage

number of outputs

4

output current up to 60 °C per output rated value

10 A

adjustable current response value current of the current-dependent overload release

2 ... 10 A

type of response value setting

via potentiometer

response delay maximum

5 s

product feature parallel switching of outputs

ندارد

efficiency in percent

97 %

power loss [W] at rated output voltage for rated value of the output current typical

30 W

of the excess current

Iout = 1.0 ...1.3 x set value, switch-off after approx. 5 s

of the current limitation

Iout = 1.3 x set value, switch-off after approx. 50 ... 100 ms

of the immediate switch-off

Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms

residual current at switch-off typical

20 mA

design of the reset device/resetting mechanism

Using keys on the module

fuse protection type at input

Blade-type fuse per output (equipped when delivered with 15 A fuse)

display version for normal operation

Two-color LED per output: green LED for "Output switched through"; red LED for "Output switched off due to overcurrent"

design of the switching contact for signaling function

Common signal contact (NO contact, rating 0.5 A/24 V DC)

اسناد و دیتاشیت

بازبینی منبع: 2026-10-24

شرح محصول

ماژول ورودی/خروجی صنعتی Siemens با پارت‌نامبر 6EP19612BA00؛ supply voltage at DC rated value: 24 V؛ type of current supply: Diagnosis module, 4 x 10 A؛ type of the power supply network: Controlled DC voltage (SITOP select is not designed for operation with DC UPS module 40 A (6EP1 931-2FC21/-2FC42). مشخصات فنی، وضعیت و امکان تأمین پیش از ثبت سفارش کنترل می‌شود.