Authenticity and condition
Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.
Industrial automation technical reference
TRENDnet
TI-S100 (v1.0R)Industrial serial terminal adapter TRENDnet TI-S100 (v1.0R)
TRENDnet
TI-S100 (v1.0R)Product image is not available.Verify the part number and specifications; the image alone does not establish suitability.
- ARAN VISION reference
- AV-REF-TRENDnet-TI-S100 (v1.0R)
- Category
- Industrial networking
- Manufacturer sourcing lead time
- Manufacturer confirmation required
Delivery to your location is confirmed separately.
- Documents / datasheets
- ARAN VISION specification sheet
Technical specifications
- Hardware version
- v1.0R
- Interface
- 1 × DB9 female serial connector to 1 × RS422/RS485 terminal block; adapter for TI-M12/TI-M42, not a standalone Ethernet gateway
- Compatibility
- Designed for TRENDnet TI-M12 and TI-M42 industrial Modbus gateways; arbitrary RS232 device compatibility and active signal conversion not established
- Terminal block
- 5-pin; 26–14 AWG solid/stranded wire; strip length 6–7 mm; torque 0.4 N·m; pinout requires installation guide confirmation
- Power supply
- Datasheet terminal section says redundant power inputs, but no voltage, current or power connector function specified; independent redundant supply not confirmed
- Operating temperature
- 0 to +40 °C; no -40 to +75 °C industrial gateway temperature inherited
- Dimensions
- 30 × 33 × 15 mm; axes not specified
- Weight
- 16 g
Documents / datasheets
Manufacturer datasheet · TI-S100 v1.0R / Updated 5/2/2022 · en · PDF · v1.0R · 2022-05-02Manufacturer source: TRENDnet · Document author: TRENDnet · Exact model verified · Covered models: TI-S100 (v1.0R) · Checked: 2026-10-09View / print the ARAN VISION specification sheetOfficial manufacturer source · TRENDnet
Source reviewed: 2026-10-09
Description
Industrial serial terminal adapter for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.
Condition and order verification
Matching technical version
The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.
Delivery estimate before ordering
Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.
Products in the same technical family
Category similarity does not establish compatibility or replacement suitability.
TI-S400 (v1.0R)Industrial serial terminal adapter TRENDnet TI-S400 (v1.0R)
Interface: Per adapter: 1 × DB9 female serial connector to 1 × RS422/RS485 terminal block; four separate adapters, not one four-port converterPower supply: Datasheet terminal section says redundant power inputs, but no voltage, current or power connector function specified; independent redundant supply not confirmed
Technical specificationsManufacturer datasheet · TI-S400 v1.0R / Updated 5/2/2022 · en · PDF · v1.0R · 2022-05-02Manufacturer source: TRENDnet · Document author: TRENDnet · Exact model verified · Covered models: TI-S400 (v1.0R) · Checked: 2026-10-09