TRENDnetTI-OS300 (V1)

Industrial Ethernet surge protector TRENDnet TI-OS300 (V1)

TRENDnetTI-OS300 (V1)Product image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-REF-TRENDnet-TI-OS300 (V1)
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Hardware version
V1 on document cover; filename v1.xR
Ports
1 × 2.5 Gbps RJ45 Line In; 1 × 2.5 Gbps RJ45 Device Out; ground terminal; inline surge protector, not a switch or injector
Power supply
Nominal PoE voltage <60 V; inline pass-through, no generated power supply stated
PoE per port
Supports passing PoE 15.4 W / PoE+ 30 W / PoE++ up to 95 W; not a generated PoE budget; Mode A/B, 1.6 A (2 pairs) / 3.2 A (4 pairs)
Protection rating
Gas discharge tube; line-to-line and line-to-ground; nominal discharge 10 kA on cover / 10 kA+ in table (8/20 µs); clamping 20 V @ 1 kA; grounding and installation verification required
Enclosure
IP67 metal enclosure; detachable bracket and two detachable cable glands; installed sealing requires verification
Operating temperature
-40 to +75 °C
Operating humidity
Maximum 95%; non-condensing
Dimensions
170 × 55 × 42 mm (L × W × H)
Weight
298 g
Report a product-data issue

Documents / datasheets

Manufacturer datasheet · TI-OS300 V1 / Updated 8/14/2025 · en · PDF · V1 · 2025-08-14Manufacturer source: TRENDnet · Document author: TRENDnet · Exact model verified · Covered models: TI-OS300 (V1) · Checked: 2026-10-09View / print the ARAN VISION specification sheetOfficial manufacturer source · TRENDnet

Source reviewed: 2026-10-09

Description

Industrial Ethernet surge protector for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.