Industrial 10G PoE++ injector TRENDnet TI-IG319 (V2)

Technical specifications

Hardware version

V2 on document cover; download filename says v2.xR; V1 not covered

Ports

1 × 10GBASE-T data input; 1 × 10GBASE-T PoE++ output; 10/100/1000/2500/10000 Mbps stated; 5 Gbps not explicitly listed; injector, not a multiport switch

PoE budget

120 W budget per cover and table; same cover lists supported PoE++ devices at 95 W; confirm actual powered-device delivery and cable losses before selection

PoE per port

Single PoE++ output; IEEE 802.3af/802.3at/802.3bt; pins 3, 4, 5, 6 positive and 1, 2, 7, 8 negative per manufacturer

Power supply

48–57 V DC; two 3-pin terminals for power, ground and alarm relay; redundant power inputs not stated; TI-S15052 sold separately; full-load sizing and wiring require confirmation

Power consumption

8.3 W maximum at 57 V DC with no powered device connected; loaded consumption not stated

Operating temperature

-40 to +75 °C

Protection rating

IP50 metal enclosure; fanless; DIN-rail and wall mount brackets included

Dimensions

120 × 98 × 30 mm

Weight

406 g

Operating humidity

Maximum 95%; non-condensing

Cable reach

Up to 100 m Ethernet link per manufacturer; cable category not specified in reviewed English document; confirm for required speed

Alarm relay

1 A at 24 V DC; terminal wiring requires confirmation

Documents / datasheets

Source reviewed: 2026-10-09

Description

Industrial 10G PoE++ injector for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.