Industrial Gigabit PoE++ extender TRENDnet TI-BE200 (v1.0R)

Technical specifications

Hardware version

v1.0R

Ports

1 × Gigabit PoE++ input; 1 × Gigabit PoE++ output and 1 × Gigabit PoE+ output in specification table; cover describes two PoE+ outputs; verify ordered port capability

Power supply

PoE-powered; power section states 60–90 W input; output table also lists 30 W input; 15.4 W detection mentioned on cover without output guarantee

PoE budget

Shared maximum 60 W with 90 W input; 51 W with 60 W input; 25 W with 30 W input; not 60 W per output

Transmission distance

Adds 100 m for 200 m total; up to four extenders / 500 m total; table chain distances 100/200/300/400 m refer to extenders from PSE, not final PD route

PoE per port

Single-port cascade table: 90 W input gives 60/34/17/9 W at chain 1/2/3/4; 60 W input gives 51/33/16/8 W; 30 W input gives 25/22/14/6 W; simultaneous two-load allocation not stated

Power consumption

2.8 W maximum without connected device

Protection

IP67 metal housing; wall mounting; three IP67 cable glands included; installation sealing and grounding require verification; reviewed datasheet cover claims 6 kV surge protection but international datasheet of the same revision/date and current support page state 4 kV; rating and waveform conditions require confirmation

Operating temperature

-40 to +75 °C

Operating humidity

Maximum 95%; non-condensing

Dimensions

167 × 74 × 44 mm; axes not specified

Weight

364 g