Industrial automation technical reference
ARAN VISIONفارسی
Schneider ElectricHMIST6400

Schneider Electric Harmony ST6 HMI touch panel / HMIST6400

Schneider ElectricHMIST6400Product image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-REF-Schneider Electric-HMIST6400
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product family
Harmony ST6
Display size
7 inch wide
Display resolution
800 x 480 pixels
Touch panel
Single-touch analog resistive
Voltage - Supply
24 VDC nominal; 19.2-28.8 VDC
Power consumption
9 W maximum
Dimensions
208 x 153 x 45 mm (W x H x D)
Panel cutout
190 x 135 mm; apply drawing tolerances and panel thickness limits
Weight
0.8 kg or less
Interfaces
2 Ethernet RJ45; COM1 RS232C D-sub 9; COM2 RS485 RJ45; USB Type-A and micro-B
System memory
1 GB Flash EPROM
Backup memory
512 KB NVRAM
Protection rating
IP65F front only when properly installed in enclosure; indoor use
Engineering software
EcoStruxure Operator Terminal Expert
Document pages
22, 24, 25, 26, 27
Reviewed document edition
EIO0000003527.04 / 01/2024
Current lifecycle status
Not independently verified; documentation does not establish current production, stock or Iranian demand
Report a product-data issue

Documents / datasheets

Manufacturer manual · EIO0000003527.04 / 01/2024 · en · PDF · EIO0000003527.04 / 01/2024 · 2024-01-01Manufacturer source: Schneider Electric · Model explicitly covered in family document · Covered models: HMIST6400 · Checked: 2026-10-23View / print the ARAN VISION specification sheetOfficial manufacturer source · Schneider Electric

Source reviewed: 2026-10-23

Description

Selection specifications follow the official English Harmony ST6 hardware guide. Confirm model compatibility, mode-specific limits, revision and current supply before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.

Schneider Electric
HMIST6500

Schneider Electric Harmony ST6 HMI touch panel / HMIST6500

Display resolution: 1024 x 600 pixelsVoltage - Supply: 24 VDC nominal; 19.2-28.8 VDC

Technical specificationsManufacturer datasheet · Exact-model product datasheet; 2020-07-01 · en · PDF · 2020-07-01Manufacturer source: Schneider Electric · Exact model verified · Covered models: HMIST6500 · Checked: 2026-10-23Manufacturer manual · EIO0000003527.04 / 01/2024 · en · PDF · EIO0000003527.04 / 01/2024 · 2024-01-01Manufacturer source: Schneider Electric · Model explicitly covered in family document · Covered models: HMIST6500 · Checked: 2026-10-23