Closed-loop motion driver Oriental Motor AZD-KR2D

Technical specifications

Control interface

RS-485 / Modbus RTU; other industrial networks require a separate Oriental Motor network converter; not a direct EtherCAT driver

Positioning data

256 positioning data sets per exact product page; not physical I/O channels

Main supply

24 V DC ±5% or 48 V DC ±5%; allowable 20–32 V at 24 V nominal, or 22.8–32 V with brake motor; 40–55 V at 48 V nominal

Input current

Main: 0.4–3.7 A depending on motor. Control: 0.15 A standard, 0.4 A brake motor, 0.23 A for AZM46

Control supply

Optional control supply can retain monitoring when main power is off; main/control grounds are not electrically insulated

Dimensions and mass

47 × 53 × 24 mm; 56 g

Operating environment

0…+50 °C, non-freezing; humidity ≤85% non-condensing; altitude ≤1000 m; no corrosive gas, dust, water or oil

Protection rating

IP10; install in an enclosure

Configuration

MEXE02 support software; confirm compatible AZ motor/actuator and required separate cables

Documents / datasheets

Source reviewed: 2026-10-16

Description

Closed-loop motion driver for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.