Industrial fixed-mount barcode reader Keyence SR-X100

KeyenceSR-X100Product image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference: AV-REF-Keyence-SR-X100
Category: Sensors and machine vision
Manufacturer sourcing lead time: Manufacturer confirmation required
Delivery to your location is confirmed separately.
Documents / datasheets: ARAN VISION specification sheet

Technical specifications

Model scope: SR-X100 standard 1.4-megapixel type; no AI filter. Not W wide-field or P PoE model.
Imager: 1360 × 1024 CMOS; focus adjusts during installation/tuning.
Reading geometry: 70–1000 mm range; 74 × 55 mm field at 300 mm. Application-dependent.
Digital I/O: 2 bidirectional voltage inputs; 3 Photo MOS outputs, maximum 50 mA each and 100 mA total.
Communication: 100BASE-TX, RS-232C and USB 2.0; Ethernet includes EtherNet/IP, PROFINET and OPC UA.
Supply: 24 V DC +25%/−20%; approximately 650 mA.
Protection rating: IP65/IP67 only with USB port cover fitted.
Environment: 0–45 °C; 35–85% RH without condensation; approximately 180 g.
Document access: Official English HTML specification verified; downloadable PDF requires manufacturer sign-in and remains pending.

Report a product-data issue

Documents / datasheets

Manufacturer datasheet · Exact SR-X100 official HTML specification; PDF sign-in required · en · HTMLManufacturer source: Keyence · Document author: KEYENCE Corporation · Exact model verified · Covered models: SR-X100 · Checked: 2026-10-14View / print the ARAN VISION specification sheet Official manufacturer source · Keyence

Source reviewed: 2026-10-14

Description

Industrial fixed-mount barcode reader for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.