Industrial automation technical reference
ARAN VISIONفارسی
Baslera2A2048-114umBAS

Industrial camera Basler a2A2048-114umBAS

Baslera2A2048-114umBASProduct image is not available.

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-REF-Basler-a2A2048-114umBAS
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Resolution
2064 × 1552; 3.2 MP
Frame rate
94.6 fps at default settings; 115 fps only with Device Link Throughput Limit Off and sensor bit depth 8 bit
Sensor
Sony IMX900-AMR-C; progressive scan CMOS
Interface
USB 3.0; nominal maximum 5 Gbit/s interface rate
Colour
Mono; visible + NIR (0.4–1.1 µm)
Shutter
Global shutter
Pixel size
2.25 × 2.25 µm
Lens mount
C-mount
Power consumption
Approximately 2.4 W typical at 5 V DC
I/O
1 opto-coupled input; 2 GPIO lines
Protection rating
IP30
Dimensions
36.3 × 29 × 29 mm without lens mount or connectors; 48.1 × 29 × 29 mm with them
Report a product-data issue

Documents / datasheets

Manufacturer manual · a2A2048-114umBAS / manufacturer HTML documentation (Draft Version) · en · HTML · Draft VersionManufacturer source: Basler · Exact model verified · Covered models: a2A2048-114umBAS · Checked: 2026-10-09View / print the ARAN VISION specification sheetOfficial manufacturer source · Basler

Source reviewed: 2026-10-09

Description

Industrial camera for engineering selection. Check the manufacturer's documentation for the ordered variant, options and installation conditions.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.