Industrial PLC controller ABB PM5630-2ETH

Technical specifications

Manufacturer article number

1SAP131000R0378

Hardware revision

Revision 3, standard AC500; not XC or MC kit. R0278 revision 2 is Limited.

Processor

ARM Cortex-A9; 300 MHz.

Application memory

Program/data 2 MB; web data maximum 6 MB; total downloadable application 9 MB. Resources are not all simultaneously achievable.

Firmware requirement

BootFW/CPUFW V3.6.x or later; no downgrade below V3.6.0. Existing application requires Automation Builder 2.6.0 or later upgrade.

Network interfaces

Two 10/100BASE-TX interfaces via TB56xx-2ETH; configurable switch/independent. RS-232/485, CAN; EtherCAT requires external CM579.

Supply current

24 V DC; module-alone minimum typical 110 mA; system maximum typical 400 mA including communication/I/O. Not output-current capacity.

Motion example

Typical EtherCAT 4 axes / 2 ms, plus one virtual axis; external module/application dependent.

Environment

Standard: horizontal 0–60 °C; vertical 0–40 °C with output load reduced to 50% per group.

Assembly scope

Terminal base required; communication slots depend on base/CPU. Central I/O ratings are expansion capacity, not integrated channels.