Industrial automation technical reference
ARAN VISIONفارسی
Siemens6ES75325HD000AB0

Analog output module Siemens model 6ES75325HD000AB0

Analog output module Siemens model 6ES75325HD000AB0, Part number 6ES75325HD000AB0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-1RODEWN
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
AQ 4xU/I ST
Firmware version
V2.2.0
PROFIBUS from GSD version/GSD revision
V1.0 / V5.1
PROFINET from GSD version/GSD revision
V2.3 / -
Rated value (DC)
24 V
permissible range, lower limit (DC)
20.4 V
permissible range, upper limit (DC)
28.8 V
Number of analog outputs
4
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)
0.02 %
Monitoring the supply voltage
Yes
Monitoring of the supply voltage (PWR-LED)
Yes; green LED
Width
35 mm
Height
147 mm
Depth
129 mm
HW functional status
from FS04
FW update possible
Yes
I&M data
Yes; I&M0 to I&M3
Isochronous mode
No
Prioritized startup
No
Output range scalable
No
STEP 7 TIA Portal configurable/integrated from version
V12 / V12
STEP 7 configurable/integrated from version
V5.5 SP3 / -
Oversampling
No
MSO
Yes
Reparameterization possible in RUN
Yes
Calibration possible in RUN
Yes
Reverse polarity protection
Yes
Current consumption, max.
190 mA; with 24 V DC supply
Power consumption from the backplane bus
0.6 W
Power loss, typ.
4 W
Voltage output, short-circuit protection
Yes
Voltage output, short-circuit current, max.
24 mA
Current output, no-load voltage, max.
22 V
Cycle time (all channels), min.
3.2 ms; independent of number of activated channels
Analog output with oversampling
No
0 to 10 V
Yes
1 V to 5 V
Yes
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

Analog output module Siemens part number 6ES75325HD000AB0; Rated value (DC): 24 V; permissible range, lower limit (DC): 20.4 V; permissible range, upper limit (DC): 28.8 V. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.