Industrial automation technical reference
ARAN VISIONفارسی
Siemens6ES72141HG400XB0

PLC controller Siemens CPU 1214C DC/DC/Relay model 6ES7214-1HG40-0XB0

PLC controller Siemens CPU 1214C DC/DC/Relay model 6ES7214-1HG40-0XB0, Part number 6ES72141HG400XB0

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-16M3GKA
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
CPU 1214C DC/DC/relay
Firmware version
V4.7
permissible range, lower limit (DC)
20.4 V
permissible range, upper limit (DC)
28.8 V
Rated value (DC)
24 V
number of communications modules (CM)
3
Number of digital inputs
14; Integrated
Number of digital outputs
10; Relays
Number of analog inputs
2
Number of analog outputs
0
Number of PROFINET interfaces
1
Interface type
PROFINET
automatic detection of transmission rate
Yes
RJ 45 (Ethernet)
Yes
PROFINET IO Controller
Yes
PROFINET IO device
Yes
SIMATIC communication
Yes
Open IE communication
Yes; Optionally also encrypted
Transmission rate, max.
100 Mbit/s
PG/OP communication
Yes; encryption with TLS V1.3 pre-selected
Updating time
The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO
Yes
PROFIBUS
Yes; CM 1243-5 (master) or CM 1242-5 (slave) required
PROFINET system redundancy (S2)
No
PROFINET system redundancy (R1)
No
User data per job, max.
See online help (S7 communication, user data size)
Memory size per trace, max.
512 kbyte
IP degree of protection
IP20
Fall height, max.
0.3 m; five times, in product package
Width
110 mm
Height
100 mm
Depth
75 mm
Programming package
STEP 7 V20 or higher
24 V DC
Yes
Reverse polarity protection
Yes
Current consumption (rated value)
500 mA; CPU only
Supports protocol for PROFINET IO
Yes
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

PLC controller Siemens part number 6ES72141HG400XB0; permissible range, lower limit (DC): 20.4 V; permissible range, upper limit (DC): 28.8 V; Rated value (DC): 24 V. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.