Industrial automation technical reference
ARAN VISIONفارسی
Siemens6ES71936BP000DA1

I/O base unit Siemens model 6ES71936BP000DA1

I/O base unit Siemens model 6ES71936BP000DA1, Part number 6ES71936BP000DA1

Verify the part number and specifications; the image alone does not establish suitability.

ARAN VISION reference
AV-FEED-BF6KT8
Category
PLC and HMI
Manufacturer sourcing lead time
Manufacturer confirmation required

Delivery to your location is confirmed separately.

Documents / datasheets
ARAN VISION specification sheet

Technical specifications

Product type designation
BU type A1
Rated value (DC)
24 V
Width
15 mm
Height
117 mm
Depth
35 mm
HW functional status
FS10 and higher
external protection for power supply lines
Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic
For P1 and P2 bus, max.
10 A
For process terminals, max.
2 A
Temperature sensor
Yes
New potential group
Yes
Potential group continued from the left
No
Number of slots
1; Type A1
between the potential groups
Yes
Isolation tested with
707 V DC (type test)
environmental product declaration
Yes
global warming potential, (total) [CO2 eq]
0.873 kg
global warming potential, (during production) [CO2 eq]
0.866 kg
global warming potential, (during operation) [CO2 eq]
0 kg
global warming potential, (after end of life cycle) [CO2 eq]
-0.0011 kg
horizontal installation, min.
-30 °C
horizontal installation, max.
60 °C
vertical installation, min.
-30 °C
vertical installation, max.
50 °C
Installation altitude above sea level, max.
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
dew point, min.
-60 °C; suitable for dry room applications
for process terminals
CC00 to CC09
for AUX terminals
does not exist
for add-on terminals
does not exist
Terminal type
Push-in terminal
system-integrated shield connection
Yes; Optional
Conductor cross-section, min.
0.14 mm²; AWG 26
Conductor cross-section, max.
2.5 mm²; AWG 14
Number of process terminals to I/O module
16
Number of terminals to AUX bus
0
Number of add-on terminals
0
Report a product-data issue

Documents / datasheets

View / print the ARAN VISION specification sheetManufacturer datasheetOfficial manufacturer source · Siemens

Source reviewed: 2026-10-24

Description

I/O base unit Siemens part number 6ES71936BP000DA1; Rated value (DC): 24 V; external protection for power supply lines: Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic; Number of process terminals to I/O module: 16. Technical specifications, condition and supply feasibility are checked before ordering.

Ask about this product

Send the part number and your question for technical or sourcing review.

Condition and order verification

Authenticity and condition

Product authenticity and actual condition, including new condition when offered as new, are checked before final approval and recorded in the quotation.

Matching technical version

The part number, revision, firmware or version is checked against your requirements. Apparently similar products may differ in price because of their version or condition.

Delivery estimate before ordering

Specialist products have a lead time. The valid delivery estimate is stated in the quotation after checking availability and specifications.

Products in the same technical family

Category similarity does not establish compatibility or replacement suitability.

Siemens
6DD1681-0AE2

Siemens SB10 binary I/O interface for FM458-1 DP / 6DD1681-0AE2

Binary I/O connection capacity: 8 binary I/O signals per ordering description; separate input/output allocation not established by this rowController family: SIMATIC S7-400

Technical specificationsManufacturer technical catalog · Siemens ST400 May 2017; exact technical/ordering row, PDF 87 · en · PDF · May 2017Manufacturer source: Siemens · Model explicitly covered in family document · Covered models: 6DD1681-0AE2 · Checked: 2026-10-22